Digital Wrench Informational Site

Program Name:

URL:

Description:

This update consists of all changes to Digital Wrench Version 3.9 since the original version was released in August 2017.

IMPORTANT: 
THIS UPDATE WILL NOT INSTALL ON OLDER VERSIONS OF DIGITAL WRENCH. YOU MUST ALREADY HAVE VERSION 3.9 INSTALLED ON YOUR PC BEFORE ATTEMPTING TO INSTALL THIS UPDATE.

FOLLOW THE APPROPRIATE LINKS ON THE DEALER EXTRANET OR CONTACT POLARIS TECHNICAL SUPPORT IF YOU NEED INFORMATION ON HOW TO OBTAIN THE DIGITAL WRENCH VERSION 3.9 INSTALLER.

Update 10/23/17 Includes the following changes & additions from the original program release and Previous Updates:

-Addition of OEM calibration for 2018 Indian International Bikes 
-Revised calibration for 2017 Sportsman 1000 ATV 
-Revised calibration for 2015 Ranger Diesel Vehicles 
-Addition of 2018 RZR 900 and RZR S1000 Vehicles 
-Addition of 2018 Ranger 500 Vehicles 
-Addition of 2018 Ranger Mid and Full Size Vehicles 
-Addition of 2018 Ranger XP 1000 Vehicles

IMPORTANT: This update may also perform a firmware update on the SmartLink Module the first time it is connected. This update procedure must be allowed to complete before using the SmartLink.

NOTE: Reflashing a calibration should only be performed while working on a related issue, replacing an ECU or if there is an outstanding Service Bulletin requiring the ECU to be reflashed.

Click the link above, save the file to your hard disk and then double-click the icon to start the update process.

When the update is complete, the Version shown on the right side of the Digital Wrench Start-up Screen should read "Version 3.9 10/23/17".

Note: Do not "run" or "open" the file from where they are. Select "save" and download them to your PC before running the install.

Category:

Author's Name:

Author's Email:

Filesize: (in bytes)

Version:

HomePage: